Tatazone 16.4ft Tunable White COB Led Strip Light with RF Remote, CRI93+ Dimmable CCT 2700K-6500K Led Tape Lights, Adhesive High Density Dual Color Led COB Light Strip for Bedroom, Kitchen, Cabinet

Tatazone 16.4ft Tunable White COB Led Strip Light with RF Remote, CRI93+ Dimmable CCT 2700K-6500K Led Tape Lights, Adhesive High Density Dual Color Led COB Light Strip for Bedroom, Kitchen, Cabinet

Product Features

• Adjust Color 2700K-6500K LED Tape Light: This white LED strip light can change color from 2700K to 6500K. You can choose warm white, neutral white, or daylight white to get a comfortable white light color for reading, working, or relaxing time
• Easy to Install: The flexible tunable COB LED strip kit comes with an 8.2ft wire cord from the power supply to the light strip, and the high-quality strong adhesive tape makes the LED COB light strip easy to install (Designed for 3pin, 8mm wide LED strip connectors. Not compatible with 2pin)
• High Density of LEDs: The COB LED light strip has 3200 LEDs on board, making the light strip uniform and soft. The chips are covered with yellow silicone material to create a smooth light effect
• Easy to Control: The RF remote offers a 49.2 ft wireless range and works through walls and obstacles without needing to point at the receiver. The controller also features a built-in button for manual operation, while the remote can be paired for independent or synchronized control
• Sleeping Mode: The light strip will slowly turn off in 30 minutes, allowing you to enjoy peaceful and natural sleep time
• Multiple Functions: Memory function, dimmable, tunable white 2700K-6500K, timer function, sleeping mode, remote sync
• Eye-Friendly Continuous Light Strip: The Color Rendering Index (CRI) is up to 92+, making the lighting color close to natural sunlight
• Pairing Mode: Simultaneously press and hold the 3000K and 5000K buttons for 3 seconds, then release. The light strip will flash, indicating the remote has been successfully paired with the controller. (If you have two or more sets of products, the power supply to other light strips must be unplugged during pairing. Otherwise, one remote may pair with all light strips at the same time.)