sourcing map Shrinking End Cap 8 mm ID x 25 mm L 2:1 Waterproof Electric Drath Wrap Adhesive Lined Sealed Heat Shrink Tube Caps for Drath Cable Pack of 50
sourcing map Shrinking End Cap 8 mm ID x 25 mm L 2:1 Waterproof Electric Drath Wrap Adhesive Lined Sealed Heat Shrink Tube Caps for Drath Cable Pack of 50
sourcing map Shrinking End Cap 8 mm ID x 25 mm L 2:1 Waterproof Electric Drath Wrap Adhesive Lined Sealed Heat Shrink Tube Caps for Drath Cable Pack of 50
What is it? The cap is coated with hot melt adhesive on the inside and may shrink when heated. When the glue melts, the cap is firmly glued to the surface of the cable. They provide sealing, waterproofing, insulation and protection for connections of power and control cables. What do I get? The shrink caps offer here, has the size of: Material: polyolefin. Installation: Self Adhesive Shrink rate: 2:1. Rated voltage: 35 kV. Operating temperature: -55°C ~ 125°C. Initial shrinkage temperature: 80°C. Complete shrink temperature: 120 °C. Size: 8 x 25 mm / 0.3 x 0.98 inches (ID x L). Box contents: 50 x shrink end caps. Are there any advantages of the product? By using temperature resistant and flame retardant materials, it is safe and reliable, has strong chemical corrosion resistance and has good heat resistance and insulation. 2:1 shrinkage, the inner layer of hot melt adhesive provides airtight protection and easy and convenient installation on cable connections. The spiral hot melt adhesive in the inner layer of the heat- shrinkable cable cap has good flexibility after shrinkage. It can provide moisture-proof protection for outdoor and underground cables made of PVC or other materials, as well as for power and lighting cable terminations. How to use it? Slip a heat-shrinkable cable gland over the outer protective layer at the end of the cable. Heat the heat shrink fitting to shrink around the end of the cable. The heating temperature is easy to control. The heating must be stopped when the shrinkage process is complete and the glue overflows. What should I pay attention to? Please allow 3-5 mm product tolerance.
Product Features
- The cap is coated with hot melt adhesive on the inside and may shrink when heated. When the glue melts, the cap is firmly glued to the surface of the cable. They provide sealing, waterproofing, insulation and protection for connections of power and control cables.
- Shrink rate: 2:1; Rated voltage: 35K; Operating temperature: -55C~125C; Initial shrink temperature: 80C; Complete shrink temperature: 120C; Size: 8 x 25 mm / 0.3 x 0.98 inches (ID*L)
- The use of temperature-resistant and flame retardant materials provides safety and reliability, is chemically corrosion resistant and provides good heat resistance and insulation. The inner layer of hot melt adhesive with a shrinkage of 2:1 ensures airtight protection and easy and convenient installation on the cable ends. The spiral hot melt adhesive in the inner layer of the shrinkable cable cap is very flexible after shrinking.
- Cover the outer protective layer at the end of the cable with a heat-shrinkable cable gland. Heat the heat shrink tube so that it shrinks around the end of the cable. The temperature of the heating is easy to control. The heating must be finished when the shrinkage is complete and the glue overflows.
- Please allow 3-5 mm product tolerance.
Original: $96.34
-65%$96.34
$33.72More Images
sourcing map Shrinking End Cap 8 mm ID x 25 mm L 2:1 Waterproof Electric Drath Wrap Adhesive Lined Sealed Heat Shrink Tube Caps for Drath Cable Pack of 50
sourcing map Shrinking End Cap 8 mm ID x 25 mm L 2:1 Waterproof Electric Drath Wrap Adhesive Lined Sealed Heat Shrink Tube Caps for Drath Cable Pack of 50
What is it? The cap is coated with hot melt adhesive on the inside and may shrink when heated. When the glue melts, the cap is firmly glued to the surface of the cable. They provide sealing, waterproofing, insulation and protection for connections of power and control cables. What do I get? The shrink caps offer here, has the size of: Material: polyolefin. Installation: Self Adhesive Shrink rate: 2:1. Rated voltage: 35 kV. Operating temperature: -55°C ~ 125°C. Initial shrinkage temperature: 80°C. Complete shrink temperature: 120 °C. Size: 8 x 25 mm / 0.3 x 0.98 inches (ID x L). Box contents: 50 x shrink end caps. Are there any advantages of the product? By using temperature resistant and flame retardant materials, it is safe and reliable, has strong chemical corrosion resistance and has good heat resistance and insulation. 2:1 shrinkage, the inner layer of hot melt adhesive provides airtight protection and easy and convenient installation on cable connections. The spiral hot melt adhesive in the inner layer of the heat- shrinkable cable cap has good flexibility after shrinkage. It can provide moisture-proof protection for outdoor and underground cables made of PVC or other materials, as well as for power and lighting cable terminations. How to use it? Slip a heat-shrinkable cable gland over the outer protective layer at the end of the cable. Heat the heat shrink fitting to shrink around the end of the cable. The heating temperature is easy to control. The heating must be stopped when the shrinkage process is complete and the glue overflows. What should I pay attention to? Please allow 3-5 mm product tolerance.
Product Features
- The cap is coated with hot melt adhesive on the inside and may shrink when heated. When the glue melts, the cap is firmly glued to the surface of the cable. They provide sealing, waterproofing, insulation and protection for connections of power and control cables.
- Shrink rate: 2:1; Rated voltage: 35K; Operating temperature: -55C~125C; Initial shrink temperature: 80C; Complete shrink temperature: 120C; Size: 8 x 25 mm / 0.3 x 0.98 inches (ID*L)
- The use of temperature-resistant and flame retardant materials provides safety and reliability, is chemically corrosion resistant and provides good heat resistance and insulation. The inner layer of hot melt adhesive with a shrinkage of 2:1 ensures airtight protection and easy and convenient installation on the cable ends. The spiral hot melt adhesive in the inner layer of the shrinkable cable cap is very flexible after shrinking.
- Cover the outer protective layer at the end of the cable with a heat-shrinkable cable gland. Heat the heat shrink tube so that it shrinks around the end of the cable. The temperature of the heating is easy to control. The heating must be finished when the shrinkage is complete and the glue overflows.
- Please allow 3-5 mm product tolerance.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
sourcing map Shrinking End Cap 8 mm ID x 25 mm L 2:1 Waterproof Electric Drath Wrap Adhesive Lined Sealed Heat Shrink Tube Caps for Drath Cable Pack of 50
What is it? The cap is coated with hot melt adhesive on the inside and may shrink when heated. When the glue melts, the cap is firmly glued to the surface of the cable. They provide sealing, waterproofing, insulation and protection for connections of power and control cables. What do I get? The shrink caps offer here, has the size of: Material: polyolefin. Installation: Self Adhesive Shrink rate: 2:1. Rated voltage: 35 kV. Operating temperature: -55°C ~ 125°C. Initial shrinkage temperature: 80°C. Complete shrink temperature: 120 °C. Size: 8 x 25 mm / 0.3 x 0.98 inches (ID x L). Box contents: 50 x shrink end caps. Are there any advantages of the product? By using temperature resistant and flame retardant materials, it is safe and reliable, has strong chemical corrosion resistance and has good heat resistance and insulation. 2:1 shrinkage, the inner layer of hot melt adhesive provides airtight protection and easy and convenient installation on cable connections. The spiral hot melt adhesive in the inner layer of the heat- shrinkable cable cap has good flexibility after shrinkage. It can provide moisture-proof protection for outdoor and underground cables made of PVC or other materials, as well as for power and lighting cable terminations. How to use it? Slip a heat-shrinkable cable gland over the outer protective layer at the end of the cable. Heat the heat shrink fitting to shrink around the end of the cable. The heating temperature is easy to control. The heating must be stopped when the shrinkage process is complete and the glue overflows. What should I pay attention to? Please allow 3-5 mm product tolerance.
Product Features
- The cap is coated with hot melt adhesive on the inside and may shrink when heated. When the glue melts, the cap is firmly glued to the surface of the cable. They provide sealing, waterproofing, insulation and protection for connections of power and control cables.
- Shrink rate: 2:1; Rated voltage: 35K; Operating temperature: -55C~125C; Initial shrink temperature: 80C; Complete shrink temperature: 120C; Size: 8 x 25 mm / 0.3 x 0.98 inches (ID*L)
- The use of temperature-resistant and flame retardant materials provides safety and reliability, is chemically corrosion resistant and provides good heat resistance and insulation. The inner layer of hot melt adhesive with a shrinkage of 2:1 ensures airtight protection and easy and convenient installation on the cable ends. The spiral hot melt adhesive in the inner layer of the shrinkable cable cap is very flexible after shrinking.
- Cover the outer protective layer at the end of the cable with a heat-shrinkable cable gland. Heat the heat shrink tube so that it shrinks around the end of the cable. The temperature of the heating is easy to control. The heating must be finished when the shrinkage is complete and the glue overflows.
- Please allow 3-5 mm product tolerance.
