Kidde Heat Detector, Hardwired with Battery Backup & 2 LEDs, Interconnect Capability, Ideal for Garages GAS_SMOKE_FIRE_ALARM

Kidde Heat Detector, Hardwired with Battery Backup & 2 LEDs, Interconnect Capability, Ideal for Garages

The Kidde Heat Detector, Hardwired with Battery Backup & 2 LEDs, Interconnectable, model HD135F, is an AC/DC powered heat alarm that operates on your home's 120V power source. In the event of a power failure, the Kidde heat alarm comes equipped with a 9-Volt battery backup (included). Using heat sensing technology, the wired heat alarm detects temperatures rising above 135⁰ Fahrenheit, alerting homeowners to dangerous temperatures unlike a smoke alarm, which only detects smoke. Heat detectors are recommended for areas where a smoke alarm may not be appropriate, such as in a kitchen, garage, attic, or other area where smoke or dust may set off a false alarm on a smoke detector. Installing both smoke and heat detectors in a home can provide extra protection while triggering fewer nuisance alerts. The heat alarm includes a quick-connect power harness to make installation fast and easy. An 85-decibel alarm sounds when the high temp sensor detects elevated heat conditions. Two LEDs indicate the heat sensor alarm's status: a green LED is constantly 'on' when AC power is present, and a red LED will flash every 30-40 seconds to indicate that the heat alarm is operating properly; the red LED and will flash rapidly when the unit is sounding until air temperature is reduced. The Kidde heat detector can be used as a single unit or interconnected with up to 24 Kidde devices (18 of which can be initiating) in a multiple-station arrangement, not exceeding the NFPA (National Fire Protection Association) limit of 18 initiating devices (smoke, heat, CO). It is possible to interconnect 6 strobe lights and or relay modules. Ideal for garages. UL Certified with a 5-year limited warranty. From the Manufacturer The Kidde 120-Volt AC Hardwire Heat Alarm gives you and your family an early warning to dangerous temperatures of 135-Degree F or more. This unit can be used as a single station unit or it can be interconnected to up to 24 Kidde devices in a multiple station arrangement. The interconnect system should not exceed the NFPA interconnect limit of 12 smoke alarms and or 18 initiation alarms. The heat detector includes a tamper resist pin to help deter tampering or theft.

Product Features

• Heat detector alerts to temperatures rising above 1350 Fahrenheit & sounds an 85-decibel alarm to help protect your family
• Heat alarm operates on a 120V wired power source with a 9-Volt alkaline battery backup
• Quick-connect power harness makes installation fast and easy
• An 85-decibel alarm sounds & a red LED indicates the smoke detector is sensing smoke or fire
• Test-Hush Button makes testing the detector or silencing false alarms easy (false alarms may occur from routine cooking, shower steam, dust or humidity)
• Interconnection capability: allows you to connect up to 18 Kidde smoke, heat, or CO alarms, with the possibly it interconnect 6 strobe lights or relay modules
• UL Certified, 5-year limited manufacturer warranty