Heated Motorcycle Grips Covers, IP67 Waterproof Winter Motorcycle Gear, Heated Grips for 12V ATV Motorcycle Hand Grip with Temperature Adjustable & Fast Heating
Heated Motorcycle Grips Covers, IP67 Waterproof Winter Motorcycle Gear, Heated Grips for 12V ATV Motorcycle Hand Grip with Temperature Adjustable & Fast Heating
Heated Motorcycle Grips Covers, IP67 Waterproof Winter Motorcycle Gear, Heated Grips for 12V ATV Motorcycle Hand Grip with Temperature Adjustable & Fast Heating
OXWIND ATV Heated Grips, Adjustable Handlebar Heater, IP67 Waterproof Motorcycle Heated Grips for 22mm Motorcycle/ATV Handlebars - Name: 12V strap type anti-slip five-speed heating electric heating handle cover Material: Fabric - PVC; Strap - Polypropylene; Heating piece - Composite fiber heating wire Input voltage: DC12V Fuse piece: 5A Working voltage: DC 12.2V (because this product has anti-power loss protection, if it is lower than 12.2V, the product cannot be used) Size: length 10.5cm, width 9.5cm, strap length 64cm Product line length: 12.5CM (length of connecting wire from heating chip) 104CM (heating chip to switch) 150CM (switch to terminal block) (manual measurement, there will be a certain error, please refer to the actual situation) Working temperature: -30°C---+100°C Power and temperature control values: First gear (red): 18W/85°C; Second gear (orange): 14W/75°C; Third gear (yellow): 10W/60°C; Fourth gear (green): 8W /55°C; Fifth gear (blue): 6W/50°C (the above data are obtained from experiments, the specific values may fluctuate slightly due to changes in objective factors such as voltage and environment, and are for reference only) Wiring method: ① The red wire is connected to the positive terminal of the battery, and the black wire is connected to the negative terminal of the battery. ② If the original car has an SAE plug, you can directly plug the SAE plug on the line into the SAE plug of the original car. Instructions: (1) If VIN <11.7V, it will not turn on; if VIN <12.2V, the LED light will flash for 5 seconds (1hz 50%) and it will turn off. (2) Working status: The indicator light is always on (First gear: Red is always on, Second gear: Orange is always on, Third gear: Yellow is always on, Fourth gear: Green is always on, Fifth gear: Blue is always on)
Product Features
- OXWIND heated grips for motorcycle is compatible with 22mm diameter 12V motorcycle/ATV handlebars
- Motorcycle heated grips with 5-Level adjustable temperature
- The atv hand warmers only takes 10 seconds to get warm, fast heating
- Heating handlebar cover is made of premium and durable rubber PVC fabric
- Upgraded IP67 waterproof motorcycle grips, full body waterproof (except cable to battery)
Original: $117.35
-65%$117.35
$41.07More Images
Heated Motorcycle Grips Covers, IP67 Waterproof Winter Motorcycle Gear, Heated Grips for 12V ATV Motorcycle Hand Grip with Temperature Adjustable & Fast Heating
Heated Motorcycle Grips Covers, IP67 Waterproof Winter Motorcycle Gear, Heated Grips for 12V ATV Motorcycle Hand Grip with Temperature Adjustable & Fast Heating
OXWIND ATV Heated Grips, Adjustable Handlebar Heater, IP67 Waterproof Motorcycle Heated Grips for 22mm Motorcycle/ATV Handlebars - Name: 12V strap type anti-slip five-speed heating electric heating handle cover Material: Fabric - PVC; Strap - Polypropylene; Heating piece - Composite fiber heating wire Input voltage: DC12V Fuse piece: 5A Working voltage: DC 12.2V (because this product has anti-power loss protection, if it is lower than 12.2V, the product cannot be used) Size: length 10.5cm, width 9.5cm, strap length 64cm Product line length: 12.5CM (length of connecting wire from heating chip) 104CM (heating chip to switch) 150CM (switch to terminal block) (manual measurement, there will be a certain error, please refer to the actual situation) Working temperature: -30°C---+100°C Power and temperature control values: First gear (red): 18W/85°C; Second gear (orange): 14W/75°C; Third gear (yellow): 10W/60°C; Fourth gear (green): 8W /55°C; Fifth gear (blue): 6W/50°C (the above data are obtained from experiments, the specific values may fluctuate slightly due to changes in objective factors such as voltage and environment, and are for reference only) Wiring method: ① The red wire is connected to the positive terminal of the battery, and the black wire is connected to the negative terminal of the battery. ② If the original car has an SAE plug, you can directly plug the SAE plug on the line into the SAE plug of the original car. Instructions: (1) If VIN <11.7V, it will not turn on; if VIN <12.2V, the LED light will flash for 5 seconds (1hz 50%) and it will turn off. (2) Working status: The indicator light is always on (First gear: Red is always on, Second gear: Orange is always on, Third gear: Yellow is always on, Fourth gear: Green is always on, Fifth gear: Blue is always on)
Product Features
- OXWIND heated grips for motorcycle is compatible with 22mm diameter 12V motorcycle/ATV handlebars
- Motorcycle heated grips with 5-Level adjustable temperature
- The atv hand warmers only takes 10 seconds to get warm, fast heating
- Heating handlebar cover is made of premium and durable rubber PVC fabric
- Upgraded IP67 waterproof motorcycle grips, full body waterproof (except cable to battery)
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Heated Motorcycle Grips Covers, IP67 Waterproof Winter Motorcycle Gear, Heated Grips for 12V ATV Motorcycle Hand Grip with Temperature Adjustable & Fast Heating
OXWIND ATV Heated Grips, Adjustable Handlebar Heater, IP67 Waterproof Motorcycle Heated Grips for 22mm Motorcycle/ATV Handlebars - Name: 12V strap type anti-slip five-speed heating electric heating handle cover Material: Fabric - PVC; Strap - Polypropylene; Heating piece - Composite fiber heating wire Input voltage: DC12V Fuse piece: 5A Working voltage: DC 12.2V (because this product has anti-power loss protection, if it is lower than 12.2V, the product cannot be used) Size: length 10.5cm, width 9.5cm, strap length 64cm Product line length: 12.5CM (length of connecting wire from heating chip) 104CM (heating chip to switch) 150CM (switch to terminal block) (manual measurement, there will be a certain error, please refer to the actual situation) Working temperature: -30°C---+100°C Power and temperature control values: First gear (red): 18W/85°C; Second gear (orange): 14W/75°C; Third gear (yellow): 10W/60°C; Fourth gear (green): 8W /55°C; Fifth gear (blue): 6W/50°C (the above data are obtained from experiments, the specific values may fluctuate slightly due to changes in objective factors such as voltage and environment, and are for reference only) Wiring method: ① The red wire is connected to the positive terminal of the battery, and the black wire is connected to the negative terminal of the battery. ② If the original car has an SAE plug, you can directly plug the SAE plug on the line into the SAE plug of the original car. Instructions: (1) If VIN <11.7V, it will not turn on; if VIN <12.2V, the LED light will flash for 5 seconds (1hz 50%) and it will turn off. (2) Working status: The indicator light is always on (First gear: Red is always on, Second gear: Orange is always on, Third gear: Yellow is always on, Fourth gear: Green is always on, Fifth gear: Blue is always on)
Product Features
- OXWIND heated grips for motorcycle is compatible with 22mm diameter 12V motorcycle/ATV handlebars
- Motorcycle heated grips with 5-Level adjustable temperature
- The atv hand warmers only takes 10 seconds to get warm, fast heating
- Heating handlebar cover is made of premium and durable rubber PVC fabric
- Upgraded IP67 waterproof motorcycle grips, full body waterproof (except cable to battery)
