DAOKAI 5A AC Sensor Current Sensor Current Transformer ZMCT103C Single Phase AC Current Transformer Module Active Output Current Sensor Module Board with Dupont Cable, Pack of 5
DAOKAI 5A AC Sensor Current Sensor Current Transformer ZMCT103C Single Phase AC Current Transformer Module Active Output Current Sensor Module Board with Dupont Cable, Pack of 5
DAOKAI 5A AC Sensor Current Sensor Current Transformer ZMCT103C Single Phase AC Current Transformer Module Active Output Current Sensor Module Board with Dupont Cable, Pack of 5
The module is equipped with ZMCT103C series small high-precision current transformer and high-precision operational amplifier circuit for accurate sampling and proper compensation of signals. It is convenient for signal acquisition of AC power within the range of 5A. The corresponding output analog AC signal can be adjusted. Required The output voltage can be adjusted according to the potentiometer (adjust the magnification, the magnification range is 0. -100 times), but the maximum voltage of the output terminal (Out) will not exceed 1/2 VCC.The module is an output analog signal. Specification: Model: ZMCT103C. Rated input current: 5A. Rated output current: 5 mA. Change rate: 1000:1. Phase difference: less than or equal to 20' (100 Ω). Linear range: 0-10 A (100 Ω). Linearity: 0.2%. Accuracy class: 0.2. Insulation withstand voltage: 3000 V. Operating temperature: -40 °C to 70 °C. Sealing material: epoxy resin. Module power supply voltage: 5-30V DC. On-board precision miniature current transformer On-board high-precision operational amplifier circuit, accurate sampling and proper compensation of signals and other functions The module can measure AC current within 5A, and the corresponding output analog can be adjusted PCB board size: 38 (mm) x18.5 (mm) Instructions: When measuring, the measured signal wire passes through the round hole of the transformer, VCC and GND are connected to the DC-30V power supply, VOUT and GND are connected to the oscilloscope, and the potentiometer is adjusted to obtain the waveform you want.The current increases and increases, but the maximum will not exceed 1/2VCC. Package includes: 5 x current transformers. 20 x Male and female DuPont cable
Product Features
- What it does: the current transformer module can measure AC within 5A and the corresponding output analog can be adjusted.
- Features: The module is equipped with small high-precision ZMCT103C series current transformers and high-precision operational amplifier circuits, which can accurately sample the signal and correctly compensate for it.
- SPECIFICATION: Rated Input Current: 5A; Rated Output Current: 5mA; Linear Range: 0-10A (100); Linearity: 0.2%; Supply Voltage: 5-30V DC.
- Instructions: when measuring, the measured signal wire runs through the round hole of the transformer, VCC and GND are connected to the DC 30V power supply, VOUT and GND are connected to the oscilloscope and the potentiometer is adjusted to get the desired waveform. The current will increase and rise, but the maximum will not exceed 1/2VCC.
- Products included: 5 x power transformers; 20 x male and female DuPont cables.
More Images
DAOKAI 5A AC Sensor Current Sensor Current Transformer ZMCT103C Single Phase AC Current Transformer Module Active Output Current Sensor Module Board with Dupont Cable, Pack of 5
DAOKAI 5A AC Sensor Current Sensor Current Transformer ZMCT103C Single Phase AC Current Transformer Module Active Output Current Sensor Module Board with Dupont Cable, Pack of 5
The module is equipped with ZMCT103C series small high-precision current transformer and high-precision operational amplifier circuit for accurate sampling and proper compensation of signals. It is convenient for signal acquisition of AC power within the range of 5A. The corresponding output analog AC signal can be adjusted. Required The output voltage can be adjusted according to the potentiometer (adjust the magnification, the magnification range is 0. -100 times), but the maximum voltage of the output terminal (Out) will not exceed 1/2 VCC.The module is an output analog signal. Specification: Model: ZMCT103C. Rated input current: 5A. Rated output current: 5 mA. Change rate: 1000:1. Phase difference: less than or equal to 20' (100 Ω). Linear range: 0-10 A (100 Ω). Linearity: 0.2%. Accuracy class: 0.2. Insulation withstand voltage: 3000 V. Operating temperature: -40 °C to 70 °C. Sealing material: epoxy resin. Module power supply voltage: 5-30V DC. On-board precision miniature current transformer On-board high-precision operational amplifier circuit, accurate sampling and proper compensation of signals and other functions The module can measure AC current within 5A, and the corresponding output analog can be adjusted PCB board size: 38 (mm) x18.5 (mm) Instructions: When measuring, the measured signal wire passes through the round hole of the transformer, VCC and GND are connected to the DC-30V power supply, VOUT and GND are connected to the oscilloscope, and the potentiometer is adjusted to obtain the waveform you want.The current increases and increases, but the maximum will not exceed 1/2VCC. Package includes: 5 x current transformers. 20 x Male and female DuPont cable
Product Features
- What it does: the current transformer module can measure AC within 5A and the corresponding output analog can be adjusted.
- Features: The module is equipped with small high-precision ZMCT103C series current transformers and high-precision operational amplifier circuits, which can accurately sample the signal and correctly compensate for it.
- SPECIFICATION: Rated Input Current: 5A; Rated Output Current: 5mA; Linear Range: 0-10A (100); Linearity: 0.2%; Supply Voltage: 5-30V DC.
- Instructions: when measuring, the measured signal wire runs through the round hole of the transformer, VCC and GND are connected to the DC 30V power supply, VOUT and GND are connected to the oscilloscope and the potentiometer is adjusted to get the desired waveform. The current will increase and rise, but the maximum will not exceed 1/2VCC.
- Products included: 5 x power transformers; 20 x male and female DuPont cables.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
DAOKAI 5A AC Sensor Current Sensor Current Transformer ZMCT103C Single Phase AC Current Transformer Module Active Output Current Sensor Module Board with Dupont Cable, Pack of 5
The module is equipped with ZMCT103C series small high-precision current transformer and high-precision operational amplifier circuit for accurate sampling and proper compensation of signals. It is convenient for signal acquisition of AC power within the range of 5A. The corresponding output analog AC signal can be adjusted. Required The output voltage can be adjusted according to the potentiometer (adjust the magnification, the magnification range is 0. -100 times), but the maximum voltage of the output terminal (Out) will not exceed 1/2 VCC.The module is an output analog signal. Specification: Model: ZMCT103C. Rated input current: 5A. Rated output current: 5 mA. Change rate: 1000:1. Phase difference: less than or equal to 20' (100 Ω). Linear range: 0-10 A (100 Ω). Linearity: 0.2%. Accuracy class: 0.2. Insulation withstand voltage: 3000 V. Operating temperature: -40 °C to 70 °C. Sealing material: epoxy resin. Module power supply voltage: 5-30V DC. On-board precision miniature current transformer On-board high-precision operational amplifier circuit, accurate sampling and proper compensation of signals and other functions The module can measure AC current within 5A, and the corresponding output analog can be adjusted PCB board size: 38 (mm) x18.5 (mm) Instructions: When measuring, the measured signal wire passes through the round hole of the transformer, VCC and GND are connected to the DC-30V power supply, VOUT and GND are connected to the oscilloscope, and the potentiometer is adjusted to obtain the waveform you want.The current increases and increases, but the maximum will not exceed 1/2VCC. Package includes: 5 x current transformers. 20 x Male and female DuPont cable
Product Features
- What it does: the current transformer module can measure AC within 5A and the corresponding output analog can be adjusted.
- Features: The module is equipped with small high-precision ZMCT103C series current transformers and high-precision operational amplifier circuits, which can accurately sample the signal and correctly compensate for it.
- SPECIFICATION: Rated Input Current: 5A; Rated Output Current: 5mA; Linear Range: 0-10A (100); Linearity: 0.2%; Supply Voltage: 5-30V DC.
- Instructions: when measuring, the measured signal wire runs through the round hole of the transformer, VCC and GND are connected to the DC 30V power supply, VOUT and GND are connected to the oscilloscope and the potentiometer is adjusted to get the desired waveform. The current will increase and rise, but the maximum will not exceed 1/2VCC.
- Products included: 5 x power transformers; 20 x male and female DuPont cables.
