🚚 Free Worldwide Shipping on All Orders!Shop Now
Aideepen 12 V Power Supply, 240 W 20 A LED Power Supply Adapter, LED Transformer 12 V for LED Strips, AC 110-265 V to DC 12 V 20 A 240 W Switching Power Supply 110-265V to 12V 20A
HomeStore

Aideepen 12 V Power Supply, 240 W 20 A LED Power Supply Adapter, LED Transformer 12 V for LED Strips, AC 110-265 V to DC 12 V 20 A 240 W Switching Power Supply 110-265V to 12V 20A

Aideepen 12 V Power Supply, 240 W 20 A LED Power Supply Adapter, LED Transformer 12 V for LED Strips, AC 110-265 V to DC 12 V 20 A 240 W Switching Power Supply 110-265V to 12V 20A

Aideepen 12 V Power Supply, 240 W 20 A LED Power Supply Adapter, LED Transformer 12 V for LED Strips, AC 110-265 V to DC 12 V 20 A 240 W Switching Power Supply

Specification: 100% Full Load Burn-In Test, Universal AC Input/Full Range Input: AC 110-265V 50/60Hz Output: DC 12V 20A, max. 240 W. Protection: Overload/Over Voltage/Short Circuit Cooling method: natural air cooling (not recommended for use in the bathroom) Connect: L, N: AC input GND: DC power output "-" V: DC output "+". +V/ADJ: adjust the output voltage. Security compliance: CCC/FCC/CE Working temperature: 0~40℃. Storage temperature: -20~60℃. Ambient humidity: 0~95% (no condensation) Features: 1. This is a DC12V power supply that is professionally used in LED lighting, security surveillance systems, CCTV security cameras, IP cameras, etc. 2. Safety design with short circuit protection, overload protection and surge protection. 3. Voltage control and current output. This is perfect as an LED driver for all types of LED lighting. 4. Flicker-free light and ensure LED durability. 5. LED lighting with dimmable function allows power output across the entire area. 6. The voltage output can be finely tuned to adapt it to different power conditions. About the calculation method: If your LED strip has 60 LEDs/m and each LED has 0.2W, then calculate the maximum LED strip length: 0.2W/LED × 60LEDs/m = 12W/m, 24W (for this list) ÷ 12W/m = 2m, Therefore, the length of the supported LED strip (60 LEDs/m, 0.2 W/LED) (maximum) = 2 m. Please note: 1. Please select the correct input voltage as well as the correct input and output connection methods. 2. Do not remove the protective layer before installing the power supply to prevent foreign objects from falling into it when switching on and damaging the power supply. 3. Please remove the protective film of the case after installation to avoid affecting the heat dissipation of the power supply. 4. To avoid electric shock, do not disassemble the power supply housing. Special attention: 1. This power supply does not come with cables, on/off switches or screws. 2. Professional installation by a qualified electrician is recommended. Product Installation Instructions: 1. Please use screws with a length of less than 4 mm when installing to reliably attach the power supply. 2. Before turning on after installation, please check and calibrate the connectors on each terminal block to ensure input and output, AC and DC, positive and negative poles, voltage values and current values are correct. Avoid reverse polarity and incorrect connections and avoid damage to the user's power supply and devices. 3. Please measure with a multimeter before switching on whether the live cable, neutral conductor and earth are short-circuited and whether the output terminal is short circuited. When switched on, it is best to start without load. 4. Do not exceed the nominal value of the power supply when using, so as not to affect the reliability of the product. 5. In order to ensure the safety of use and reduce interference, please make sure the ground connection is reliably grounded (the ground wire is larger than AWG18). 7. Do not turn the power supply on and off frequently, otherwise the service life will be affected.

Product Features

  • Switching power supply parameters: input: AC 110-265V, 50/60Hz; Output: DC 12V, 20A, 240W.(With the fluctuation switch, you can switch the input voltage range)
  • Premium material: the housing of the switching power supply 12V 20A is made of durable aluminium. The internal coil uses a pure copper coil for a longer service life. The switching power supply is equipped with high-quality terminal blocks, which is safe and reliable."
  • Multiple protection: 12V 20A power supply adapter transformer has overload protection, overvoltage protection and short circuit protection, which can be restored after eliminating the anomaly.
  • Scope of Application This 230V to 12V transformer LED device is professionally used in LED lighting, security surveillance systems, CCTV security cameras, IP cameras, industrial automation, communications, etc.
  • Note: Before installing switching power supply, please select the correct input voltage as well as input and output connection methods and read the precautions in the description carefully. If you have any questions, please contact us.
$45.89

Original: $131.11

-65%
Aideepen 12 V Power Supply, 240 W 20 A LED Power Supply Adapter, LED Transformer 12 V for LED Strips, AC 110-265 V to DC 12 V 20 A 240 W Switching Power Supply 110-265V to 12V 20A—

$131.11

$45.89

More Images

Aideepen 12 V Power Supply, 240 W 20 A LED Power Supply Adapter, LED Transformer 12 V for LED Strips, AC 110-265 V to DC 12 V 20 A 240 W Switching Power Supply 110-265V to 12V 20A - Image 2
Aideepen 12 V Power Supply, 240 W 20 A LED Power Supply Adapter, LED Transformer 12 V for LED Strips, AC 110-265 V to DC 12 V 20 A 240 W Switching Power Supply 110-265V to 12V 20A - Image 3
Aideepen 12 V Power Supply, 240 W 20 A LED Power Supply Adapter, LED Transformer 12 V for LED Strips, AC 110-265 V to DC 12 V 20 A 240 W Switching Power Supply 110-265V to 12V 20A - Image 4
Aideepen 12 V Power Supply, 240 W 20 A LED Power Supply Adapter, LED Transformer 12 V for LED Strips, AC 110-265 V to DC 12 V 20 A 240 W Switching Power Supply 110-265V to 12V 20A - Image 5
Aideepen 12 V Power Supply, 240 W 20 A LED Power Supply Adapter, LED Transformer 12 V for LED Strips, AC 110-265 V to DC 12 V 20 A 240 W Switching Power Supply 110-265V to 12V 20A - Image 6
Aideepen 12 V Power Supply, 240 W 20 A LED Power Supply Adapter, LED Transformer 12 V for LED Strips, AC 110-265 V to DC 12 V 20 A 240 W Switching Power Supply 110-265V to 12V 20A - Image 7

Aideepen 12 V Power Supply, 240 W 20 A LED Power Supply Adapter, LED Transformer 12 V for LED Strips, AC 110-265 V to DC 12 V 20 A 240 W Switching Power Supply 110-265V to 12V 20A

Aideepen 12 V Power Supply, 240 W 20 A LED Power Supply Adapter, LED Transformer 12 V for LED Strips, AC 110-265 V to DC 12 V 20 A 240 W Switching Power Supply

Specification: 100% Full Load Burn-In Test, Universal AC Input/Full Range Input: AC 110-265V 50/60Hz Output: DC 12V 20A, max. 240 W. Protection: Overload/Over Voltage/Short Circuit Cooling method: natural air cooling (not recommended for use in the bathroom) Connect: L, N: AC input GND: DC power output "-" V: DC output "+". +V/ADJ: adjust the output voltage. Security compliance: CCC/FCC/CE Working temperature: 0~40℃. Storage temperature: -20~60℃. Ambient humidity: 0~95% (no condensation) Features: 1. This is a DC12V power supply that is professionally used in LED lighting, security surveillance systems, CCTV security cameras, IP cameras, etc. 2. Safety design with short circuit protection, overload protection and surge protection. 3. Voltage control and current output. This is perfect as an LED driver for all types of LED lighting. 4. Flicker-free light and ensure LED durability. 5. LED lighting with dimmable function allows power output across the entire area. 6. The voltage output can be finely tuned to adapt it to different power conditions. About the calculation method: If your LED strip has 60 LEDs/m and each LED has 0.2W, then calculate the maximum LED strip length: 0.2W/LED × 60LEDs/m = 12W/m, 24W (for this list) ÷ 12W/m = 2m, Therefore, the length of the supported LED strip (60 LEDs/m, 0.2 W/LED) (maximum) = 2 m. Please note: 1. Please select the correct input voltage as well as the correct input and output connection methods. 2. Do not remove the protective layer before installing the power supply to prevent foreign objects from falling into it when switching on and damaging the power supply. 3. Please remove the protective film of the case after installation to avoid affecting the heat dissipation of the power supply. 4. To avoid electric shock, do not disassemble the power supply housing. Special attention: 1. This power supply does not come with cables, on/off switches or screws. 2. Professional installation by a qualified electrician is recommended. Product Installation Instructions: 1. Please use screws with a length of less than 4 mm when installing to reliably attach the power supply. 2. Before turning on after installation, please check and calibrate the connectors on each terminal block to ensure input and output, AC and DC, positive and negative poles, voltage values and current values are correct. Avoid reverse polarity and incorrect connections and avoid damage to the user's power supply and devices. 3. Please measure with a multimeter before switching on whether the live cable, neutral conductor and earth are short-circuited and whether the output terminal is short circuited. When switched on, it is best to start without load. 4. Do not exceed the nominal value of the power supply when using, so as not to affect the reliability of the product. 5. In order to ensure the safety of use and reduce interference, please make sure the ground connection is reliably grounded (the ground wire is larger than AWG18). 7. Do not turn the power supply on and off frequently, otherwise the service life will be affected.

Product Features

  • Switching power supply parameters: input: AC 110-265V, 50/60Hz; Output: DC 12V, 20A, 240W.(With the fluctuation switch, you can switch the input voltage range)
  • Premium material: the housing of the switching power supply 12V 20A is made of durable aluminium. The internal coil uses a pure copper coil for a longer service life. The switching power supply is equipped with high-quality terminal blocks, which is safe and reliable."
  • Multiple protection: 12V 20A power supply adapter transformer has overload protection, overvoltage protection and short circuit protection, which can be restored after eliminating the anomaly.
  • Scope of Application This 230V to 12V transformer LED device is professionally used in LED lighting, security surveillance systems, CCTV security cameras, IP cameras, industrial automation, communications, etc.
  • Note: Before installing switching power supply, please select the correct input voltage as well as input and output connection methods and read the precautions in the description carefully. If you have any questions, please contact us.

Product Information

Shipping & Returns

Description

Aideepen 12 V Power Supply, 240 W 20 A LED Power Supply Adapter, LED Transformer 12 V for LED Strips, AC 110-265 V to DC 12 V 20 A 240 W Switching Power Supply

Specification: 100% Full Load Burn-In Test, Universal AC Input/Full Range Input: AC 110-265V 50/60Hz Output: DC 12V 20A, max. 240 W. Protection: Overload/Over Voltage/Short Circuit Cooling method: natural air cooling (not recommended for use in the bathroom) Connect: L, N: AC input GND: DC power output "-" V: DC output "+". +V/ADJ: adjust the output voltage. Security compliance: CCC/FCC/CE Working temperature: 0~40℃. Storage temperature: -20~60℃. Ambient humidity: 0~95% (no condensation) Features: 1. This is a DC12V power supply that is professionally used in LED lighting, security surveillance systems, CCTV security cameras, IP cameras, etc. 2. Safety design with short circuit protection, overload protection and surge protection. 3. Voltage control and current output. This is perfect as an LED driver for all types of LED lighting. 4. Flicker-free light and ensure LED durability. 5. LED lighting with dimmable function allows power output across the entire area. 6. The voltage output can be finely tuned to adapt it to different power conditions. About the calculation method: If your LED strip has 60 LEDs/m and each LED has 0.2W, then calculate the maximum LED strip length: 0.2W/LED × 60LEDs/m = 12W/m, 24W (for this list) ÷ 12W/m = 2m, Therefore, the length of the supported LED strip (60 LEDs/m, 0.2 W/LED) (maximum) = 2 m. Please note: 1. Please select the correct input voltage as well as the correct input and output connection methods. 2. Do not remove the protective layer before installing the power supply to prevent foreign objects from falling into it when switching on and damaging the power supply. 3. Please remove the protective film of the case after installation to avoid affecting the heat dissipation of the power supply. 4. To avoid electric shock, do not disassemble the power supply housing. Special attention: 1. This power supply does not come with cables, on/off switches or screws. 2. Professional installation by a qualified electrician is recommended. Product Installation Instructions: 1. Please use screws with a length of less than 4 mm when installing to reliably attach the power supply. 2. Before turning on after installation, please check and calibrate the connectors on each terminal block to ensure input and output, AC and DC, positive and negative poles, voltage values and current values are correct. Avoid reverse polarity and incorrect connections and avoid damage to the user's power supply and devices. 3. Please measure with a multimeter before switching on whether the live cable, neutral conductor and earth are short-circuited and whether the output terminal is short circuited. When switched on, it is best to start without load. 4. Do not exceed the nominal value of the power supply when using, so as not to affect the reliability of the product. 5. In order to ensure the safety of use and reduce interference, please make sure the ground connection is reliably grounded (the ground wire is larger than AWG18). 7. Do not turn the power supply on and off frequently, otherwise the service life will be affected.

Product Features

  • Switching power supply parameters: input: AC 110-265V, 50/60Hz; Output: DC 12V, 20A, 240W.(With the fluctuation switch, you can switch the input voltage range)
  • Premium material: the housing of the switching power supply 12V 20A is made of durable aluminium. The internal coil uses a pure copper coil for a longer service life. The switching power supply is equipped with high-quality terminal blocks, which is safe and reliable."
  • Multiple protection: 12V 20A power supply adapter transformer has overload protection, overvoltage protection and short circuit protection, which can be restored after eliminating the anomaly.
  • Scope of Application This 230V to 12V transformer LED device is professionally used in LED lighting, security surveillance systems, CCTV security cameras, IP cameras, industrial automation, communications, etc.
  • Note: Before installing switching power supply, please select the correct input voltage as well as input and output connection methods and read the precautions in the description carefully. If you have any questions, please contact us.