0.36 inch 4-bit digital tube display module with LED display TM1637 driver chip LED display programmable tube clock display for ARDUINO display 7-segment red digital tube uno (3) 3

0.36 inch 4-bit digital tube display module with LED display TM1637 driver chip LED display programmable tube clock display for ARDUINO display 7-segment red digital tube uno (3)

This module is a 12-foot display module with a 4-point positive digital (0.36-inch) display module driver IC TM1637. The SCM has four 8-segment LEDs that can be controlled via two signal lines.

Product Features

• The 4-digit LED segment display of the lamp tube has a red common anode display size of 0.36 inches, and the product size is about 42, 24, 12 mm. A 0.36 inch 4-digit LED segment display of the lamp tube has a red common anode display weight of about 8 g.
• A 4-digit luminous red display with seven segments and colons for each character, making the LED display more energy efficient.
• The driving IC is TM1637, and only two signal lines are needed to allow the MCU to control four 8-segment LEDs. Can be used to display decimal places, letters, etc.
• Input voltage: 3.3-5.5V DC. The interface level can be controlled with 5V or 3.3V. The control can only be achieved via four pins. Easy programming through open source libraries.
• The digital tube has 8 levels of adjustable grayscale, 4-M2 screw positioning holes for easy installation and a total of four pins (GND, VCC, DIO, CLK). GND is the ground, VCC is the power supply, DI0 is the data input/output pin and CLK is the clock signal pin. DIGITAL TUBE A 0.36" digital tube with a 4-bit common anode and a gear ratio point, highlighted in red. Positioning holes: 4-M2 screw positioning holes with a diameter of 2.2 mm, which make it easy to install and position the module and achieve intermodule combination.